The first of these three products is the Tuo Smart Button with Matter over Thread, and of the three this is the only one available to order right now.

This single-button device uses a single CR2032 battery for power and comes with a magnetic wall plate and a set of icon stickers to let you know what the button has been programmed to do. As it uses Matter over Thread, you’re going to need a Thread Border Router for your preferred smart home platform, so in the case of Apple Home that will be the HomePod Mini, HomePod (2nd gen), or the Apple TV4k (2021 or 2023 w/ 128GB). As it’s compatible with Apple Home, it offers single, double, and long press actions as standard. The Smart button is priced at US$34.99, although you can save 10% by using the code TUOJULY via the company’s website/store.

The Tuo Contact Sensor utilises Matter over Thread, just like their Smart Button, although this device uses a single CR2450 battery. At the time of writing, this can only be preordered, although shipping is slated for July, with a price of US$39.99. The sensor takes a slightly different approach to the design/shape, going with something more akin to an oval or pill shape.

Finally, the company have a new smart lock – The Tuo Smart Lock – that’s both HomeKit and HomeKey compatible, with a smart clean design not dissimilar to the original Vocolinc T-Guard Smart Lock. The lock is designed to replace regular deadbolt locks, so it’s more geared towards the North American market, and comes with a standard keyhole and backlit keypad, although as it uses HomeKey, you’re unlikely to need the keypad or keys that often.

Since speaking to a representative from the company, it’s confirmed that the lock does indeed use HomeKit over Thread, although whether it’ll get updated to make it a Matter over Thread product is open-ended at the moment.  It’s unclear whether the lock will rely on standard Bluetooth for connectivity or Thread, but given that Matter supports smart locks as a category, it’s quite possible that it’ll use Thread once it’s released, which is slated for a September release, with a price of US$199.99.

You can find out more about Tuo and its products via the company website.

The post New Matter Devices Announced From Newcomer Tuo appeared first on Homekit News and Reviews.

The Onvis HS2 is a wireless controller featuring five individual buttons, with the design of the HS2 showcasing a rounded square surface with the first button positioned at the centre, while the remaining four buttons are placed in each corner. To aid visibility, each button is adorned with small noctilucent dots that emit a glow in the dark. The central button is labelled as ‘one,’ followed by buttons ‘two,’ ‘three,’ ‘four,’ and ‘five’ in the respective corners.

Similar to Onvis’ previous release – their Contact Sensor CT3 – the HS2 operates using Thread, meaning it’s fully compatible with HomeKit. This integration enables each button to offer standard functionalities such as single, double, and long-press options. With this, users can program a minimum of fifteen customizable actions on this single device.

Moreover, the HS2 comes with a magnetic holder serving as a pedestal. This holder allows for convenient mounting on various magnetic surfaces, while still granting the freedom to carry the controller around when needed.

The HS2 is currently only compatible with Apple Home, using HomeKit over Thread, but there are talks that it could receive an update to support Matter, and therefore other Matter-enabled platforms later down the line. Obviously, you should treat any future update promises with caution.

The post Onvis Thread Smart Button Now Available to Order appeared first on Homekit News and Reviews.

Flowchart

To get started, take a look at this flowchart below which outlines how the automation actually works. This should make it a little easier to understand what’s going to happen and what I’m explaining.

The Automation

To get started, open the Home app and Long/3D press on the smart button icon. Choose one of the actions and select “add scenes and accessories”. In that menu, scroll all the way to the bottom of the list and choose “Convert to Shortcut”.

Open the actions list, and choose “Get Date” and then set the variable as “current date”. So the automation should read “Get dates from Current Date”.

For the next action we want to format the date into short form. So choose the action “Format Date” and the variable should automatically assign itself to the date from the previous action. In that same action, choose “show more” and change Date Format to none and Time Format to short.

For the third action, we want to round the short format time to a single number. So choose the “Round Number” action and assign the variable to “Formatted Date” and have it rounded to “ones place”. And that’s all that is needed for the first half of this automation. So if the time is 11:30 PM at night, than the rounded number will be “23” (this automations works in 24 hour time).

For the next half of this automation, grab an If Statement and make the condition “If [Smart Light/Device] is off” and within that, use multiple if statements to determine the time and thus the action. For example, in my automation I have “If Rounded Number is between 7 and 10″ turn on the daytime scene”. Continue this until you have all the actions that you want and delete the otherwise tags for all of those inner If Statements. For the outer if statement, within the otherwise tag set the lights to turn off.

Thus, when the automation runs it’ll trigger when you press the button. It checks the time and then checks if the light is on or off. If it is off, then it will compare the rounded down time to the if statements and complete whatever action you set. If the lights are on, it’ll turn them off. And that’s all there is to it. As for the second and third actions of the button, you can do whatever you want. You can use it to control other lights or have it set scenes in its dedicated room. Automation runs as far as your imagination can.

For a visual look at this automation, check out the photo below so you can see what it should look like for you.

The post Advanced Smart Button Light Switch appeared first on Homekit News and Reviews.

Not wanting to let the scarcity of Smart Switches get in the way of my home automation journey, I decided to look at things another way. I decided to repurpose the Cygnett Smart Control Button, which I recently purchased, and use the Home+ app to create a condition-based automation for when the button is pressed.

The best part of this is you can have a single click for turning on and off, and then save the double click and long press for activating different scenes or for controlling other accessories around your home.

The video below will show you exactly how I accomplished this:

The post Using a Smart Button as a Smart Light Switch With Home+ appeared first on Homekit News and Reviews.

PACKAGING

In terms of packaging and presentation, there’s not a lot to say other than Hue definitely have their own style, and are always keen to keep brand continuity at the forefront. So with the box here, if you’ve seen any other Hue packaging previously, you’ll immediately recognise the styling here. The front simply has the Smart Button, along with the wallplate, on the front. The side of the box has more of the same but with the addition of the ZigBee logo. It’s important to note that whilst many new and updated Hue products now include Bluetooth in addition to ZigBee, this isn’t the case with the particular product, so if you were planning on buying this to work with any recently acquired Hue bulbs with just Bluetooth usage in mind, this switch will not work with them, at least not until you add the bulbs to a 2nd gen Hue Bridge, at which point, the Bluetooth part of the bulbs stops and they begin using ZigBee (yes, it sounds complicated…).

The rear of the box has the usual info you might expect of any electronic product and also has a little information on the basic features, including;

• The button uses a CR2032 coin battery (incorrectly states CR2450 on the packaging)
• the button is designed to withstand up to 50,000 presses
• has a range of 39ft/12m

The button and the plates (yes there are two…sort of) are all well-protected with an inner corrugated card structure, although the button itself is only held in place by the edges of the cardboard, so when I received the delivery, the button was, in fact, rattling around the inside of the box. The contents of the box, as you can already imagine are scant, with just the main wallplate, a mini circular mount, two booklets, and the button itself.

THE BUTTON & PLATES

Onto the device itself, and before anything else, the one question that has already been asked a lot is, how does it feel when pressing it? There isn’t much ‘travel’ when you press the button, but it doesn’t require much effort to press it, and when you do, it doesn’t feel soft or ‘squishy’ under your finger. There’s a definite click, sound and feel-wise, although you’d really have to have it close to your ear to even notice any real click sound, so if you want something that emits virtually no sound at all, then this could well be the thing you’re looking for. Also included are the main wall plate and a circular ‘mini mount’. The button is magnetic and can ‘stick’ to either of these plates, although neither of these is magnetic by themselves.

The front of the Smart Button has a debossed(?) Hue logo and not a lot else, which is fine by me, although I can easily see dirt building up inside the letterpressed logo over time. The material used for the button is, out of necessity, some kind of latex or rubber, which has a matt look and slightly velvety touch to it, which would also probably suffer from dirt from finger presses over time, but unlike a button made of PVC, which is generally easy to wipe, I’m not sure this material would be as easy to clean. To the untrained eye, it would be hard to notice a difference in the shade of white between the button and the plate itself, but there is a minute difference nonetheless, with the button having a slightly more creamy white hue, with the plate being a more sheer white. It’s barely noticeable at all, although it’s entirely possible that the rubber of the switch will turn more yellow over time, to make the difference more apparent. Come back in a few years, and I’ll let you know…

As you can see from the profile pic of the button above, it’s slightly larger at the base, coming in at 31 x 31mm/1.22 x 1.22in and 29 x 29mm/1.14 x 1.14in at the top and 14mm/0.55in in height. The full-sized wallplate is 6mm/0.24in deep, but because the wall plate has a bit of a recess for the button, the button and plate combined only come to 16.5mm/0.65in in total, which is only slightly deeper than the Hue Dimmer switch at 14.25mm/0.56in. The Hue Smart Button also has an LED under the ‘skin’ of the button, which flashes when you press the button.

Getting into the battery compartment does require a small screwdriver or some similar tool, and while it’s not massively difficult to get to the battery, there’s easily the potential to mark or damage the body a little. Putting the battery door back in is also a bit fiddly, so take care not to break it when you try forcing the cover back on.

Hue has generously provided not only a regular wallplate but an additional mini mount, both of which use 3M double-sided tape in order for you to mount them to a surface. If you’re not really keen on having a large wall plate, or simply don’t have space, then effectively the mini mount is small enough to stick anywhere and is also small enough to actually hide behind the button itself. In fact, if you wanted to literally just have the switch mounted somewhere, you can as long as the surface is magnetic, although you’d be limiting yourself a little, given you can place the mini mount almost anywhere regardless of whether the surface is magnetic or not. Utilising the mini mount adds a mere 2mm/0.08in to the overall depth of the switch. The Mini mount also has the same Hue logo, whilst the Wallplate has the Philips logotype on the bottom.

The ‘standard’ wall plate is actually slightly bigger than the Hue Dimmer Switch wall plate, coming in at 124 x 79mm/4.88 x 3.11in, with the original Hue Dimmer only 115 x 70mm/4.5 x 2.8in. Although it’s a small detail, it would have been nice to have included some magnets to the wall plate, as is already the case with the original dimmer plate, which would have made it really convenient to have it in many more places, whilst allowing you to move it around, which, with double-sided tape, isn’t exactly an option.

SET UP (HUE APP)

As with any Hue product, you have to add it to the Hue app in order to get it exposed to HomeKit. So, assuming you’ve got the Hue Bridge and the app, it’s all very straightforward.

• In the Hue app, click on Settings > Accessory setup > Add accessory
• From the list of options, select Hue Smart Button
• Press the Hue button until the LED starts blinking

• If you encounter any issues with the button not connecting or even no flashing LED showing, you can reset the button with the reset hole inside the battery compartment of the button.
• The app will begin searching for you button and will eventually connect.
• Press Continue setup

• If you intend to solely use the Hue app, then you can choose a room for it to be located in. However, you can still add it to a room, and also have it in the Home app, if you wish.

• The Hue button has two distinct actions to choose from – Single Press and Long Press
• With Single Press, you can choose whether it uses time-based automations or cycles through a set of five different scenes
• For Long Press, you have three options; Dimming, All lights off or Do nothing. For dimming, you press and hold the button and the lights will dim down as you’re pressing the button

Once the button is all set up, it will appear in the Home app in the room you assigned it to in the Hue app. If you didn’t assign a room in the app, you can assign it in the Home app as normal.

IN HOMEKIT

This is where, in my opinion, things take a slight turn for the worse. Not because the product itself is bad, faulty or unreliable – it’s none of those – it’s simply due to the fact that when it’s exposed to HomeKit, you only get one action. So there’s no single, double and long press – just single press. It has to be noted that this is exactly the same for the Hue Dimmer switch, with each button only having one option, but I’d still argue that this is where I think it’s severely lacking. It costs around the same price as the Hue Dimmer, but you only get a quarter of the functionality. And whilst the button itself takes up very little space, with the wall plate, it actually takes up just as much space as the Hue dimmer (fractionally more in fact). Obviously, it would go against the whole way switches and buttons work with Hue if it were to have the functionality we already get with other HomeKit buttons, like the Eve Button, for example, but it seems like a wasted opportunity to not add – at the very least – a long press, especially when long press is an option in the Hue app.

There are, of course, ways around this, so you can have it so that the single press action can toggle between on and off, but this requires the use of a third-party app, like the excellent Eve for HomeKit, just to get it the most basic of use out of it. I would suggest that it has its limits even within the Hue world, but then maybe this is designed to provide more of a focused function rather than be an ‘all-bells-and-whistles’ type of device. As it stands in the HomeKit world though, it’s really a one-trick pony ( or should that be a one-legged pony?), which is somewhat of a disappointment.

IN DAY-TO-DAY USE
As it happens, I do have a quite specific use case for this Smart Button, which really only requires one function. My elderly mother-in-law often needs assistance with opening jars and containers or reaching stuff on high shelves, and so by pressing the button, she can trigger a very specific scene that lets me know she needs assistance. As it only has the one function, there’s no need to explain complex instructions to her, or any chance of triggering anything else, due to the fact that it can only do the one thing in HomeKit. I previously had this functionality tied to an Aqara smart mini switch, but as that has double and long press options, then there’s always the potential for a mistaken press.

So far, the button has been a ‘hit’ in this respect, and it small enough to not be a dominant feature where it’s kept, and because it’s magnetic, she can pick it up and place it back with a fair amount of ease. There have been no issues with unresponsiveness, but given how generally solid Hue products are in this respect, I didn’t really have any doubts about that at all.

It Hue had somehow been able to include a way of letting the switch rotate whilst it was held in the wall plate, that would allow dimming in a rotary fashion, it could have held a more unique place, albeit just in the Hue app, but sadly I think if it had some form of functionality of this sort, we would have found out by now I imagine.

Summing up, I’m pretty torn, as if it wasn’t for the aforementioned use case, it would really be of little use, when I’m so used to a world where double and long presses are the norm. But I do like the design, and I do like the solid Hue system. It just falls short when it comes to HomeKit functionality, and that’s a real shame. My suggestion would be to seriously think what you could possibly use it for before spending the even modest price it’s asking, otherwise, it could end up sitting in a drawer until you do.

The post Philips Hue Smart Button (review) appeared first on Homekit News and Reviews.

Although the Smart Dial will work with Apple HomeKit, it does have to go through the company’s own Home Center Hub, which connects to your network via an ethernet connection. The hub itself connects to its ‘child devices’ via Zigbee, in much the same way as the Hue and Aqara hubs work.

Whilst it does boast the ability to control devices via its rotary dial, this functionality is currently limited to being programmed within Terncy’s own HomeKit app, although as previously mentioned, it also acts as a regular push-button too, which can be programmed via the Apple Home app or any 3rd party HomeKit app. If you also own the Xiaoyan/Terncy Smart Curtain Motor, then you’ll be able to control the opening and closing of the curtains with the rotary dial. The accompanying manual also states that with the Smart Dial, you will be able to dim lights, as well as turn them on or off and even control the volume of your amplifier. We’ve yet to find out how dimming of lights, or controlling volume will work, but it could be something that works with Google Assistant or Amazon Alexa, but not HomeKit.

There’s no word on pricing yet, but Xiaoyan have said they’re close to being ready to sell this very soon. In the meantime, you can check out our overview video to get an idea of their other HomeKit compatible products below;

More information from xiaoyan.io

The post Terncy Set to Release Their Smart Dial Rotary Switch appeared first on Homekit News and Reviews.

As good as all this news is, one more product, has been spotted on expercom.com, namely the Hue Smart Button (model number 553719). It is, however, listed as out of stock. Worse still for the inquisitive, there isn’t an image to accompany the listing at this time, so there’s no way to know exactly what this device looks like.

What we can gather from the info found on the Hue subReddit page, as posted by u/hueblog (who incidentally runs the  great German Hue website HueBlog.de) is that the button will run on a lithium coin battery, most likely a CR2032, and will undoubtedly use Bluetooth and hopefully ZigBee.

We suspect that it will be something along the lines of the Eve Button, or the Aqara Mini Wireless switch, which use Bluetooth and ZigBee respectively.

It should surface at the IFA Berlin Trade Show which is held from 6th – 11th September, where we should finally see all the other goodies that Hue (and other companies) have in store for us.

The post Possible ‘Hue Smart Button’ to Debut at IFA 2019 appeared first on Homekit News and Reviews.